Aquaproof & Anchoring Systems
Aquaproof & Anchoring Systems
Mundhwa, Pune, Maharashtra
GST No. 27AATPH5134R1ZX
TrustSEAL Verified
SEND SMS
SEND EMAIL

Epoxy Resin Primer

We are a leading Authorized Wholesale Dealer of nitozinc epoxy zincrich primer and fosroc nitoprime zincrich plus epoxy resin primer from Pune, India.

Nitozinc Epoxy Zincrich Primer

Nitozinc Epoxy Zincrich Primer
  • Nitozinc Epoxy Zincrich Primer
Get Best Quote
Approx. Price: Rs 650 / LitreGet Latest Price

Product Details:

BrandFosroc
Packaging Size5L,20L
Shelf Life6 months
Specific Gravity1.75
Application Thickness100 microns (wet) per Coat
Surface Drying Time20 to 40 mins at 27deg C
Packing TypeTin Can

Uses:
  • Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. 
  • The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations.
  • Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes.

Advantages
  • Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means.
  • Two component product - easy to mix and use.
  • Timesaving - Touch dry after 30 to 45 mins.
  • Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.
Request
Callback
Yes! I am Interested
View PDF

Fosroc Nitoprime Zincrich Plus Epoxy Resin Primer

Fosroc Nitoprime Zincrich Plus Epoxy Resin Primer
  • Fosroc Nitoprime Zincrich Plus Epoxy Resin Primer
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFosroc
Packaging Size4L,20L
Physical StateLiquid
ColorGray
Recommended Thickness Per Coat50 microns (dry)
Application Thickness Per Coat120 microns (wet)
Shelf Life12 months

Uses:
  • Nitoprime Zincrich is the recommended anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair mortars. 
  • The product provides a barrier to further corrosive elements such as chlorides attacking the steel.
  • Compatible with all Renderoc mortars and fluid micro-concretes.

Advantages:
  • Excellent protective barrier to the steel from further corrosive attack
  • Formulated for use with Renderoc repair products
  • Single component product - easy to use with no restrictive pot-life
  • Time saving - touch dry after 15 - 45 minutes
  • Economical - single component ensures almost no waste.

Standards Compliance:
  • Nitoprime Zincrich has been approved by the British Board of Agreement, Certificate No. 91/2582 as part of the Renderoc system of concrete repair.
  • Conforms to AS/NZS 3750.9 Type 1.

Design Criteria:
  • One or two coats of Nitoprime Zincrich are generally required, dependent largely on nature and profile of the steel substrate. Nitoprime Zincrich is recoatable generally between 30 minutes and 1 hour after the initial application. Application of concrete repair materials may also proceed at this time. At elevated temperatures, the recoatable and overlay times will be reduced. The minimum application temperature for Nitoprime Zincrich is 5°C. Consult the local Parchem sales office for further information.

Specification Clause
Steel reinforcement primer:
  • The steel reinforcement primer shall be Nitoprime Zincrich, a single-component zinc epoxy primer. An unbroken 50 microns thick coating shall be capable of providing a protective barrier to further corrosive elements attacking the steel. It shall be a suitable viscosity to enable the coating to penetrate imperfections and pits within the surface of corrosion-damaged steel bars. It shall be fully compatible with the Renderoc system of concrete repair.

Application Instructions:
Preparation:
  • Expose fully any corroded steel in the repair area and remove all loose scale and corrosion deposits. Steel should be cleaned to a bright condition paying particular attention to the back of exposed steel bars. Grit-blasting is recommended for this process.
  • Where corrosion has occurred due to presence of chlorides, the steel should be high-pressure washed with clean water immediately after grit-blasting to remove corrosion products from pits and imperfections within its surface.

Application:
  • The application of Nitoprime Zincrich must take place as soon as possible to a dry steel surface after completion of the preparation work but always within 3 hours.
  • Although a single component product, it should be stirred thoroughly before use in order to redisperse any settlement.
  • Apply one full and unbroken coat of Nitoprime Zincrich by suitable brush, making sure that the back of exposed steel reinforcing bars are properly coated. A small brush is generally more suitable for this purpose. Allow to dry fully before continuing. If any doubt exists about having achieved an unbroken coating, a second application should be made as soon as the first coat is fully dry (generally between 30 minutes and 1 hour).
Request
Callback
Yes! I am Interested
View PDF
X

Explore More Product



Reach Us
Santosh Hingane (Proprietor)
Shop No. H-5, Ganga Terrace, Near Laxmi Mata Temple Pingale Wasti
Mundhwa, Pune- 411036, Maharashtra, India



Call Us


Send E-mailSend SMS