Aquaproof & Anchoring Systems
Aquaproof & Anchoring Systems
Mundhwa, Pune, Maharashtra
SEND SMS
SEND EMAIL

Grouts & Anchors

Offering you a complete choice of products which include conbextra gp2 cementitious precision grout, conbextra ep10 epoxy resin grout, lokfix e75, lokfix e35s, lokfix e55 and fosroc conbextra hf.

Conbextra GP2 Cementitious Precision Grout

Conbextra GP2 Cementitious Precision Grout
  • Conbextra GP2 Cementitious Precision Grout
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFosroc
Model Name/NumberConbextra GP2
Packaging Size25 kg
Grade StandardM60 Grout
Shelf Life6 Months
Tensile Strength3.5N/mm2 at 28 days
Pullout Bond Strength17 N/mm2 at 7 days
Freshwet DensityApproximately 2220kg/m3 Depending on Actual Consistency Used
Youngs Modulus28 kN/mm2

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Request
Callback
Yes! I am Interested
View PDF

Conbextra EP10 Epoxy Resin Grout

Conbextra EP10 Epoxy Resin Grout
  • Conbextra EP10 Epoxy Resin Grout
Ask For Price
Product Price :Get Latest Price

Product Details:

Compressive Strength57 N/mm2 at 1 day, 66 N/mm2 at 3 day, 93 N/mm2 at 7 day
Model Name/NumberConbextra EP10
BrandFosroc
Density1050kg/m3
Tensile Strength26 N/mm2 at 7days
Flexural Strength63 N/mm2 at 7days
Pot Life90 min at 20deg C, 40min at 35deg C

Conbextra EP10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site.

Uses
Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including :
  • Underplate grouting to structural elements. 
  • Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery. 
  • Heavy industrial applications in steelworks, refineries chemical plants and electroplating works. 
  • Structural infill where very high strength is required. 
  • Rail track applications, to support heavy cranes, or on transporter rails.
Request
Callback
Yes! I am Interested
View PDF

Lokfix E75

Lokfix E75
  • Lokfix E75
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFosroc
Usage/ApplicationConstruction
Packaging Size385Ml
TypeLiquid
Grout TypeEpoxy Grout
Used ForAnchor Grout Rebaring

High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates.

Description
Lokfix E75 is a two-component Epoxy anchoring material,supplied in 3:1 ratio side-by-side cartridges , with a static mixer nozzle. When applied it sets and cures rapidly to fi rmly secure a variety of steel fi xings into concrete and solid masonry substrates.
Other grades of Lokfi x are also available
Lokfi x E35 Resin anchor cartridge system based on styrene
free Polyester for lightweight anchoring.
Lokfi x E55 Resin anchor cartridge sysem based on styrene
free vinyl-ester for medium and heavy duty anchoring.

Uses
For concrete (solid, porous and light) and solid masonry.
  • Accredited for use in dry, damp and flooded concrete substrates. 
  • Can be used with cracked concrete 
  • Fixing of post installed reinforcement 
  • Anchoring of threaded rod fixings 
  • Anchoring of internal threaded rod sleeves 
  • Internal, external and submerged conditions 
  • Can be applied to almost any size of fixing
  • For horizontal, vertical and overhead application
  • Bonding and surface crack sealing applications
Advantages
  • High Bond strengths
  • No additional mixing equipment required
  • C1 and C2 seismic resistance*
  • Does not apply expansive force to the substrate
  • Fixings can be spaced closer together than mechanical anchors
  • Enables fi xings closer to edges than mechanical anchors
  • Resistant to a variety of chemicals
  • Low VOC
  • Tested with diamond drilled bore holes
  • Fire rated up to 2 hours*
  • Waterproof, protecting the fi xing from corrosion
  • Re-usable
  • Slow gel times allow for more complex procedures
Estimating
Supply

Lokfi x E75 supplied in boxes of 12 no. 385ml cartridges,
each supplied with a single mixer nozzle. Fosroc may also supply:
  • Lokfi x E75 application gun, one size.
  • Steel cleaning brushes, in various diameter to clean the hole.
  • Dust blower pump, one size, hand held to clean the hole.
  • Hollow block sleeves, in a variety of diameters and embedded lengths for hollow bricks and blocks can be used for solid brick.
  • Extension nozzle, essential where the embedment depth is greather than 190 mm. In various lengths.
  • Piston plugs, required where the hole diameter is >20mm or where embedment depth is >240mm. Must be used with an extension nozzle.
  • Application guns, hand held for cartridge application.
  • Spare mixer nozzles, required if a cartridge is to be reused.
Request
Callback


Additional Information:

  • Packaging Details: 385Ml Pk
Yes! I am Interested
View PDF

Lokfix E35S

Lokfix E35S
  • Lokfix E35S
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFosroc
Usage/ApplicationConstruction
TypeLiquid
Packaging Size300Ml
ColorGray
Packaging TypeBottle

Styrene free polyester resin based cartridge system, for anchoring reinforcement and lightweight fixings into a variety of substrates.

Uses

For concrete (solid, porous and light), masonry, natural stone and hollow bricks.
??? Cost effective alternative for the anchoring of threaded rods, reinforcing bars, profiled rod, steel section with undercuts and internal threaded rod sleeves
??? Safe application in hollow bricks using a Hollow Block Sleeve ??? For horizontal, vertical and overhead application
??? Bonding and surface crack sealing applications
??? Suitable for dry, wet and flooded concrete.

Advantages
??? Fast return to service
??? May be used with a good quality skeleton gun (300ml size)
??? No additional mixing equipment required
??? Does not apply expansive force to the substrate
??? Enables fixings closer to edges than mechanical anchors
??? Resistant to a variety of chemicals
??? Low VOC
??? Re-usable by replacing the static mixer
??? Waterproof, protecting the fixing from corrosion
??? Performs over a wide variety of temperatures

Description
Lokfix E35 is a two component Polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.

Three grades of Lokfix E35 are available, selection is normally based upon the substrate installation temperature :

Lokfix E35S: Standard temperature grade, optimised for substrate installation temperatures between -5 to +40ºC. 

Assistance and qualification
Design of fixings and reinforcement must be undertaken by suitably qualified personnel with understanding of the construction and use of the structure, the use of the fixing, as well as being in compliance with local legislation.

In applications where fixings must be designed and applied in compliance with the requirements of the ETA, designers should consult the relevant Fosroc accreditation documents.

Estimating

Supply

Lokfix E35S E35T and E35L are supplied in boxes of 12 no. 300ml cartridges, each supplied with a single mixer nozzle. Fosroc may also supply:

??? Steel brushes, in various diameters to clean the hole.
??? Dust blower pump, one size, hand held to clean the hole.
??? Hollow block sleeves, in a variety of diameters and embedded lengths for hollow bricks and blocks.
??? Extension nozzle, essential where the embedment depth is greater than 190mm. In various lengths.
??? Piston plugs, required where the hole diameter is >20mm or where embedment depth is >240mm. Must be used with an extension nozzle.
??? Application guns, hand held for cartridge application.
??? Spare mixer nozzles, required if re-using a cartridge.

Yield
Standard yield estimation is provided in table 5 based on the hole diameter, fixing size and embedded length.

For nonstandard consumption the calculation below may be used. Factors such as over-drilling, extrusion from bolt hole, initial gun extrusion and wastage to be considered.

Storage

300ml cartridges have a maximum shelf life of 12 months when kept in a dry warehouse at between +5 to +25ºC. 

Request
Callback
Yes! I am Interested
View PDF

Lokfix E55

Lokfix E55
  • Lokfix E55
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFosroc
Usage/ApplicationConstruction
Packaging Size300Ml
TypeLiquid
ColorGray
Packaging TypeBottle

Styrene free vinyl-ester resin based cartridge system, for anchoring reinforcement, fixings into a variety of substrates.

Uses


For concrete (solid, porous and light), masonry and hollow bricks.
??? Accredited for use in dry, damp and flooded concrete substrates
??? Can be used with cracked concrete
??? Fixing of post installed reinforcement*
??? Anchoring of threaded rod fixings
??? Anchoring of internal threaded rod sleeves
??? Internal, external and submerged conditions
??? Can be applied to almost any size of fixing
??? For horizontal, vertical and overhead application
??? Bonding and surface crack sealing applications

Advantages
??? High bond strength
??? Rapid return to service
??? Can use with a good quality skeleton gun (300ml size)
??? No additional mixing equipment required
??? Does not apply expansive force to the substrate
??? Enables fixings closer to edges than mechanical anchors
??? Resistant to a variety of chemicals
??? Re-usable by replacing the static mixer
??? Low VOC
??? Waterproof, protecting the fixing from corrosion
??? Performs over a wide variety of temperatures
??? C1 seismic resistance, Lokfix E55S only
??? Fire rated up to 2 hours, Lokfix E55S only

Description
Lokfix E55 is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Two grades of Lokfix E55 are available, selection is based upon substrate installation temperature and compliance :

Lokfix E55S: Standard temperature grade, optimised for substrate installation temperatures between -10 to +40ºC. 

Hole Formation and Preparation
Drill hole with percussive drill ensuring sides of the concrete are rough. If rebar is struck immediately stop drilling and seek the advice of the designing engineer. Clean holes immediately prior to installation of fixings to avoid them becoming re-contaminated. Standing water in the hole shall be removed prior to preparation. Using a hand pump or compressed air insert the nozzle to the back of the hole and blow out 4 times.
Insert a wire cleaning brush to the bottom of the hole and brush out 4 times. Using a hand pump or compressed air insert the nozzle to the back of the hole and blow out an additional 4 times. If dust is still present, repeat the process until no further dust is visible.
Ensure the drill bit and the cleaning brush are of suitable diameter for the fixing used. 

Threaded rod:
Drill bit Ø = rod diameter +2mm
Wire brush Ø = rod diameter +4mm

Reinforcement:

Drill bit Ø = rod diameter +4mm
Wire brush Ø = rod diameter +6mm

Installation
Unscrew the fixing cap. Pull the plastic within the tube slightly upwards so that the steel collar is exposed, cut the plastic tube competently removing the metal clip and discard. Screw the static mixer nozzle onto the cartridge. Place the cartridge into the application gun.Pull the trigger to extrude the Lokfix E55.

Important: extrude the initial material until the colour becomes grey and consistent. This typically takes two or three full squeezes. Discard material that is streaky in colour. Insert the nozzle to the back of the hole and pump the Lokfix material gently pulling back until the hole is ¾ full. Ensure there are no voids in the resin. If the hole is too deep for the nozzle to reach the back, use a nozzle extender. In wide/overhead holes a piston plug will help reduce slump and ensure a void fee application.   
Request
Callback
Yes! I am Interested

Fosroc Conbextra HF

Fosroc Conbextra HF
  • Fosroc Conbextra HF
Ask For Price
Product Price :Get Latest Price

Product Details:

Physical StatePowder
Shelf Life6 months
Fresh Wet Density2200 kg/m3
Flow Consistency145%
Plastic Volume Change+0.57%

Highly fluid, dual shrinkage compensated precision, cementitious grout for gaps 10mm to 125mm thickness.

Uses:
Conbextra HF is used for free flow precision grouting in a wide range of applications. Typical pplications include:
  • Critical machine base plates, sole plates and columns
  • Joints between pre-cast concrete panels
  • Pumped grouting applications
  • Grouting applications where pouring access is restricted

Advantages:
  • Excellent initial flow and flow retention
  • Rapid strength gain facilitates efficient installation and operation of plant
  • High ultimate strength and low permeability ensure durability of the hardened grout
  • Hydrogen-free gaseous expansion
  • Chloride free
  • Suitable for pumping or pouring

Standards Compliance:
  • AS 1478.2-2005 Appendix E Early Volume Change
  • AS 1478.2-2005 Table 4.1.2.2 Consistency

Description:
  • Conbextra HF, dual shrinkage compensated cementitious precision grout, is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a freeflowing precision grout for gap thicknesses up to 125 mm. In addition the low water requirement ensures high early strength and long term durability.
  • Conbextra HF is a blend of Portland cements, graded fillers and chemical additives which impart controlled expansion in both the plastic and hardened states.
  • The filler grading minimises segregation and bleeding over a wide range of application consistencies.
  • Maximum aggregate size for pumping is 2.5 mm.

Technical Support:
  • Parchem offers a comprehensive range of high performance, high quality construction products. In addition, the company offers a technical support package to specifiers and contractors as well as technical advice from staff experienced in the construction industry.

Specification Clauses
Supplier specification:
  • All precision grouting (specify details and areas of application) must be carried out using Conbextra HF manufactured by Parchem and used in accordance with the manufacturer’s current Technical Data Sheet.

Performance Specification:
  • To the nominated area(s) (specify details and areas of application), grouting must be carried out using a pre-packaged, non-metallic and chloride free, dry powder blend of cements, graded fillers and chemical additives.
  • It is to be mixed with clean water to the required consistency. The plastic grout must not bleed or segregate. The storage, handling and placement of the grout must be in strict accordance with the manufacturer’s instructions.
  • A positive volumetric expansion up to 3% shall occur while the grout is plastic by means of a gaseous, hydrogen free system. Additionally the grout is to be formulated to compensate for longer term expansion in the hardened state.
  • It shall exhibit Flow Characteristics when tested to AS 1478.2.2005 of 10 - 30 seconds using the flow cone procedure.
  • The compressive strength of the grout must exceed 40MPa at 7 days and 60MPa at 28 days.

Preparation
Foundation surface:
  • The substrate surface must be free from oil, grease or any loosely adherent material. Concrete laitance should be removed using low impact scabbling or with needle guns to the degree where aggregate is starting to show.
  • Bolt holes or fixing pockets must be blown clean of any dirt or debris. Bolt holes should also be roughen up using mechanical means.
Request
Callback
Yes! I am Interested
View PDF

Fosroc Cebex 100 Plasticised Expanding Grout Admixture

Fosroc Cebex 100 Plasticised Expanding Grout Admixture
  • Fosroc Cebex 100 Plasticised Expanding Grout Admixture
Ask For Price
Product Price :Get Latest Price

Product Details:

Packaging Size225 g
BrandFosroc
Packaging TypePacket
Shelf Life6 Month
Model NumberCebex 100

Cebex 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/ cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.


Uses

Cebex 100 is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

Request
Callback
Yes! I am Interested
View PDF

Fosroc Lokfix P Polyster Resin Grout

Fosroc Lokfix P Polyster Resin Grout
  • Fosroc Lokfix P Polyster Resin Grout
Ask For Price
Product Price :Get Latest Price

Product Details:

Packaging size1Kg
Packaging TypeBottle, Box
BrandFosroc

We are offering a wide gamut of Fosroc Lokfix P Polyster Resin Grout to the clients. Apart from this, these products are prepared using only high quality ingredients.

Features:


  • Accurate formulation
  • long shelf life
  • No side effects
  • Perfect packaging
  • High chemical value
  • Balanced composition
Request
Callback
Yes! I am Interested
View PDF
X

Explore more products



Reach Us
Santosh Hingane (Proprietor)
Shop No. H-5, Ganga Terrace, Near Laxmi Mata Temple Pingale Wasti
Mundhwa, Pune- 411036, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS