PU Foam

Approx. Rs 550 / PackGet Latest Price

• This foam adheres to all common building materials except from surfaces such as polyethylene, polypropylene, silicone, Teflon, oil, grease and similar substrates. 
• The cured foam is semi rigid, elastic, damp proof and resistant to rotting and ageing (protect from UV light). 
• Surfaces must be firm, clean, free of dust and grease. Before application moisture surfaces with water sufficiently. 
• When layer thickness is higher than 50 mm then apply in several layers moisturizing each layer. 
• Chilled cans must be carefully warmed in luke-warm water before use. 
• Don’t heat up the can above 50 °C – Danger of bursting! Cans, which are to hot, must be cooled down in water.
• When the can is occasionally shaken, temperature change is faster.
• If not stated otherwise, the data applies to standard conditions of 23°C at 50% r. h. and non-aged foam. 
• To test yield and reactivity, at least 85% r. h. is required (humidify well before testing!). 
• In case of aged foam, the yield is up to 30% lower. 
• Tack free time and cutting time reduces as well. 
• Shake can well before use.