Superplasticizer Admixture

Approx. Rs 48 / KgGet Latest Price

Product BrochureProduct Details:

Superplasticising slump          retaining admixture

Uses:

• Conplast SP430 SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation or placing are likely or when high ambient temperatures cause rapid slump loss. To facilitate production of high quality concrete of improved durability and water tightness.

Advantages:

• Speeds Construction : Increased workability reduces placing time, equipment and labour element.
• Self Compacting : Conplast SP430SRV modified concrete is highly fluid and needs little or no compaction.
• Reduced Permeability: Better dispersion, reduces porosity and improves water penetration resistance.
• Reduced Segregation: Increased cohesion minimises segregation and bleeding, improving surface finish.
• Longer Placing Time: Conplast SP430SRV gives greater usable life of concrete at high ambient temperatures because of its unique workability retention potential.
• Improved Pumpability: Increased workability and cohesion aids pumping by reducing line friction, dry packing and slump loss due to temperature.
• Chloride Free: Safe in prestressed, reinforced or marine concrete and compatible with sulphate resisting cement or marine aggregate.

Properties

Specific Gravity: 1.260 at 300CChloride content: Nil to IS:456Setting Time: Conplast SP430SRV when used at the recommended dosage level may retard the setting of concrete.Air entrainment: Less than 1.5%

Compatibility: Conplast SP430SRV is generally compatiblewith other Fosroc Admixtures but it is recommended that alladmixtures be added to concrete separately.

Conplast SP430SRV can be used with all types of Portlandcements. For advise on special cements consult local Fosrocoffice.

Compressive Strength: Conplast SP430SRV is primarily ahighly efficient superplasticiser giving large increase inworkability without significant changes in compressivestrength.

Conplast SP430SRV may be used to produce substantialwater reduction resulting in a considerable increase incompressive strength.

Mix Design: As with all admixtures that produce flowingconcrete, the design technique should be based on highcohesion pump mix technology. Specialist advise from Fosrocis available on request.

Application instructions

Dosage: It is recommended that the optimum dosage isdetermined by site trials with the actual concrete mix. As aguide the rate of addition is generally in the range 0.35 to 0.90 litres/100 kg cement for normal mixes & 0.5 to 1 litre/100 kg for high cement content mixes. The higher dosage is used where "flowing concrete" is required and may be found necessary to modify concrete mix proportions. Fosroc can advise on mix design if required.

Curing: Normal curing methods such as water spray, wethessian or a Concure curing membrane should be used.


Storage

Shelf lifeConplast SP430SRV has a minimum shelf life of 12 monthswhen stored in unopened containers below 350C.

Precautions

Health & SafetyConplast SP430 SRV is non toxic. Any splashes should bewashed off with water. If contact with eyes occurs, washimmediately with water and seek medical advice.
FireConplast SP430SRV is non flammable.

Approx. Rs 38 / KgGet Latest Price

Product BrochureProduct Details:

Conplast SP430 G8 is based on  Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water. Conplast SP430 G8 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.


Uses:

• To produce pumpable concrete
• To produce high strength, high grade concrete M30 & above by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.

Advantage:

• Improved workability- Easier, quicker   placing and compaction.
• Increased strength - Provides high early strength for precast concrete with the advantage of higher water reduction ability.
• Improved quality - Denser, close textured  concrete   with reduced porosity and hence more durable.
• Higher cohesion- Risk of segregation and bleeding minimised; thus aids pumping of concrete
• Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

Approx. Rs 66 / KgGet Latest Price

Product BrochureProduct Details:

High performance water reducing and superplasticising admixture for microsilica concrete
Uses:

• To produce pumpable concrete
• To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.

Advantages:

• Improved workability - Easier, quicker placing and compaction.
• Increased strength - Provides high early strength for precast concrete if water reduction is taken advantage of.
• Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.
• Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete
• Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

Description

Conplast SP500 is based on Sulphonated NapthalenePolymers and is supplied as a brown liquid instantlydispersible in water.

Conplast SP500 has been specially formulated to give highwater reductions upto 25% without loss of workability or toproduce high quality concrete of reduced permeability.

Properties

Specific gravity 1.250 - 1.270 at 270CpH at 270C Minimum 6Chloride content Nil toIS:456

Compatibility : Can be used with all types of cements excepthigh alumina cement. Conplast SP500 is compatible withother types of Fosroc admixtures when added separately tothe mix. Site trials should be carried out to optimise dosages.

Workability : Can be used to produce flowing concrete thatrequires no compaction. Some minor adjustments may berequired to produce high workable mix without segregation.

Cohesion : Cohesion is improved due to dispersion ofcement particles thus minimising segregation and improvingsurface finish.

Compressive strength : Early strength is increased upto 40% if water reduction is taken advantage of. Generally, there is improvement in strength upto 20% depending upon W/Cratio and other mix parameters.
Durability : Reduction in W/C ratio enables increase in densityand impermeability thus enhancing durability of concrete.

Application instructions

DosageTrials need to be carried out at site to determine the exactdosage of the admixture for the particular mix design andmaterials. However for normal grades of concrete a dosagefrom 0.5% - 1.0% by weight of cementitious material isrecommended, the dosage may be increased to 1.5% toachieve specific slump requirements. For microsilicaconcrete where a high amount of water reduction and slumpretention are required, trials need to be carried out to arrive atthe correct dosage, as the dosage may increase upto 2.0%or even upto 2.5% by weight of cementitious materialdepending on mix design and performance required.

OverdosageAn overdose of above the recommended level of admixturemay result in high workability, slight increase in air entrainmentand retardation of setting time. The ultimate strength of theconcrete will not be adversely affected and will generally behigher than for normal concrete if properly placed and cured. 

DispensingThe measured quantity of Conplast SP500 should be addedalong with the gauging water. For best results, add ConplastSP500 in the last phase after prewetting the mix with 80% ofthe total water required.

Estimating
Packing
Conplast SP500 is supplied in 200 litre and 250kg.

StorageConplast SP500 has a minimum shelf life of 12 months whenstored under normal temperatures. It should be protectedfrom extreme temperatures and preferably stored in shade.

Approx. Rs 47 / KgGet Latest Price

Product BrochureProduct Details:

High range water reducing, superplasticising and slump          retaining admixture

Uses:

• To produce pumpable concrete
• To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.

Advantages:

• Improved workability - Easier , quicker placing and compaction.
• Increased strength - Provides high early strength for precast concrete if water reduction is taken advantage of.
• Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.
• Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete
• Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

Description

Conplast SP440 is a blend of organic polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP440 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.

Properties

pH at 270C 7.0 - 8.0Chloride content Nil. as per IS:456 and BS:5075Air entrainment Approx. 1% additional air is entrained

Compatibility : Can be used with all types of cements except high alumina cement. Conplast SP440 is compatible with other types of Fosroc admixtures when added separately to the mix. Site trials should be carried out to optimise dosages.

Workability : Can be used to produce flowing concrete thatrequires no compaction. Some minor adjustments may berequired to produce high workable mix without segregation.Cohesion : Cohesion is improved due to dispersion of cementparticles thus minimising segregation and improving surfacefinish.

Compressive strength : Early strength is increased upto 40to 50% if water reduction is taken advantage of. Generally,there is improvement in strength upto 20% depending uponW/C ratio and other mix parameters.

Durability : Reduction in W/C ratio enables increase in densityand impermeability thus enhancing durability of concrete.

Application instructions
Dosage

Trials need to be carried out at site to optimise the dosage ofthe admixture for the particular mix design and materials.However as a guide the rate of addition is generally in therange of 0.5% to 1.2% by weight of cement for normal gradesof concrete. A dosage of upto 1.5% may be used dependingon the mix design and to achieve specific slump requirements.
Over dosage
An overdose of above the recommended level of admixturemay result in high workability, slight increase in air entrainment and retardation of settingtime. The ultimate strength of the concrete will not not be adversely affected and will generally be higher than for normal concrete if properly placed and cured.
Estimating
PackingConplast SP440 is supplied in 200 litre drums.

Storage

Conplast SP440 has a minimum shelf life of 12 months whenstored under normal temperatures. It should be protectedfrom extreme temperatures and preferably stored in shade.

Approx. Rs 75 / KgGet Latest Price

Product BrochureProduct Details:

High performance PCE based Super Plasticizingadmixture – Retarding type.
Uses

Auramix 350 is a high performance super plasticizer suitablefor low and high grade concrete and intended for applicationswhere high water reduction and long workability retentionsare required. 
Auramix 350 developed to use in:

 Long workability retention concrete.   Pumpable Concrete.  High performance concrete

Advantages
 Low viscosity admixture suitable for pumping different grades of concrete to greater heights.  Suitable for concrete having cement replacements and low water cement ratio.  Provides higher strength without increase in cement content or reduction in workability. Ideal for precast concrete production.  Reduce rate of workability loss normally associated with super plasticiser. Reduces shrinkage cracking because of lower water cement ratio. Makes the concrete water impermeable.  Better resistance to Carbonation.  Reduce Shrinkage and Creep.  Increase Durability.

Description

Auramix 350 is a unique combination of new generation SuperPlasticizing admixture – Retarding type based on polycarboxilicether polymer with long lateral chain. Electrostatic dispersionmechanism considerably reduces the water demand in flowableconcrete. It is supplied as a light brown liquid, instantlydispersible in water.

Auramix 350 disperses the cement particles effectively in theconcrete mix and hence exposes a larger surface area to thehydration process. This effect is used either to increase thestrength or to produce high workability concrete or reducecement content of concrete or to retard the setting time ofconcrete.

DosageThe optimum dosage of Auramix 350 to meet specific requirement should always be determined by conducting laboratory and batch trials. However the normal dosage ranges between 0.3 to 2.0 precent by weight of total cement or binder content.

Estimating
Packaging:Auramix 350 is available in 200kg, 250kg drums and bulktankers.

StorageAuramix 350 has a minimum shelf life of 12 months providedthe temperature is kept within range of 40C and 500C.

Approx. Rs 110 / LitreGet Latest Price

Product BrochureProduct Details:

Auramix 400 Superplasticizer Admixture is a unique combination of the latest generation super plasticisers, based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete. Auramix 400 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability. Auramix 400 is a strong superplasticiser allowing production  of  consistent concrete properties around the required dosage.

Use:
Auramix 400 is a high performance superplasticiser intended for applications where high water reduction and long workability retention are required, and it has been developed for use in:

• Self Compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete

Approx. Rs 85 / LitreGet Latest Price

Product BrochureProduct Details:

Advanced low viscosity retarding Superplasticiser,based on Polycarboxylic technology
Uses 

Auramix 300 is a high performance       retarding superplasticiserintended for applications where retardation and long workability retention are required, and it has been developed for use in:

??? Mass raft foundation,??? Pumped concrete,??? Concrete requiring long workability retention,??? High performance concrete.

Advantages??? Increased retardation controls the heat of hydration and yields high ultimate strength??? Arrest bleeding and segregation due to presence of in-built VMA.??? Higher E modulus??? Improved adhesion to reinforcing and prestressing steel??? Better resistance to carbonation??? Lower permeability??? Better resistance to aggressive atmospheric conditions??? Reduced shrinkage and creep??? Increased durability

Description
Auramix 300 is a unique combination of the latest generationsuperplasticisers , based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in fl owable concrete.

Auramix 300 combines the properties of water reduction andworkability retention. It allows the production of high performance concrete and/or concrete with high workability.

Auramix 300 is a strong superplasticiser allowing productionof consistent concrete properties around the required dosage.

Dosage

The optimum dosage of Auramix 300 to meet specifi c requirements should always be determined by trials using the materials and conditions that will be experienced in use. The normal dosage range is between 0.5 to 1.5 ltrs/100 kg of cementitious material.

Estimating

PackagingAuramix 300 is available in 200 kg and 250 kg drums and bulktanker.

StorageAuramix 300 has a minimum shelf life of 12 months provided the temperature is kept within the range of 20C to 500 C. Should the temperature of the product fall outside this range then contact local Fosroc offi ce for advice. 

FireAuramix 300 is water based and non- fl ammable.

Approx. Rs 34 / LitreGet Latest Price

Product BrochureProduct Details:

Uses:

• To provide excellent acceleration        of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix. ! Particularly suitable for precast concrete and other high early strength requirements. ! To significantly improve the workability of site mixed and precast concrete without increasing water demand. ! To provide improved durability by increasing ultimate strengths and reducing concrete permeability.

Advantages:

• Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
• Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents.
• Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
• Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures.
• Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability.
• Chloride free, safe for use in prestressed and reinforced concrete.

Approx. Rs 95 / KilogramGet Latest Price

Product Details:

Auracast 270M is a unique combination of new generation super plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerablyreduces the water demand in fl owable concrete. It is suppliedas a light brown liquid, instantly dispersible in water.

Uses:
Auracast 270M is a high performance super plasticizer suitablefor precast concrete industry to obtain high early strength andmoderate workability retentions are required.Auracast 270M developed to use in:

• Moderate workability retention concrete.
• Also Suitable for cement replacement concrete such as
• fly ash, GGBFS and micro silica.
• High performance concrete.
• High early strength.

Advantages:

• Low viscosity admixture suitable for precast industry
• Suitable for concrete having cement replacements and low water cement ratio
• Provides high early strength without increase in cement content or reduction in workability. Ideal for precast concrete production.
• Reduce rate of workability loss normally associated with super plasticiser. Reduces shrinkage cracking because of lower water cement ratio. Makes the concrete water impermeable.
• Better resistance to Carbonation
• Reduce Shrinkage and Creep
• Increased durability