Chemical Anchors

Product Details:

• Best performance mortar in the shuttle cartridge based on epoxy resin.
• Optimum solution for concrete (anchor rods and reinforcement bars).
• Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
• Partially used cartridges can easily be reused by changing the static mixer.

• Excellent mortar bonding ensures highest loads in concrete.
• Suitable for underwater installations.
• Suitable for diamond drilled holes.
• Expansion-free anchoring allows low axial spacings and edge distances.
• Ergonomic injection guns for quick and easy installation.

Product Details:

• This established fixing system consists of the RG M threaded rod and the resin capsule RM
• The 2-component resin capsule RM contains quick-setting styrene-free vinylester resin and hardener.
• During setting, the edges of the threaded rod destroy the capsule in the drill hole, which mix and activate the mortar.
• The resin adheres to the entire surface of the threaded rod, bonding it to the wall of the drilled hole.

• Threaded rods are supplied with an easy to use hexagonal installation drive or can be installed with an adapter.
• High-performance resin guarantees high loads in noncracked concrete.
• The resin anchoring is free of expansion forces and permits small axial spacings and edge distances.
• Wide range for many applications.
• New European design method enables optimum use of the anchor system for cost-efficient fixing.

Product Details:

• The bonded anchor suitable for cracked concrete consists of the Anchor rod FHB II-A L (long version) or FHB II-A S (short version) and resin capsule FHB II-P, FHB II-PF or Injection mortar FIS HB.
• The FHB II-PF capsules allow quickest curing e.g. 2 min > 20°.
• The capsules FHB II-PF contains quick-setting vinyl ester resin.
• The FIS HB injection mortar is a high-strength 2-component vinyl ester mortar.
• When using the Injection mortar FIS HB 345 S a special application gun is needed. By using the application gun the two components are mixed and activated in the static mixer.
• Partially used cartridges can be reused, simply by changing the static mixer.
• The mortar bonds the entire surface of the anchor rod to the wall of the drilled hole and largely seals the hole.
• Anchor rod FHB II-A A4 made of stainless steel of the corrosion resistance class III e.g. A4 for outdoor use and in damp conditions. Highly corrosion-resistant steel of the corrosion resistance class IV e.g. 1.4529 for applications in aggressive atmospheres (e.g. tunnels, swimming baths).
• Flexible system as both injection cartridge and resin capsule can be used.
• Suitable for use in cracked tensile zone guarantees highest safety.
• Low-expansion force allows cost-efficient fixing with small edge distances and spacings.
• Ergonomic application gun guarantees fast and easy installation.
• Quick installation by hand without a setting tool reduces the work involved.

Product Details:

• Styrene-free, quick-curing high-performance hybrid mortar (contains vinylester resin and cement).
• Resin and cement as well as water and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
• Partially-used cartridges can easily be reused by changing the static mixer. FIS VW 300 T can be pressed out in a standard silicone dispenser.

• High-performance hybrid mortar for highest loads in almost all building materials.
• Universal fixing system for a broad range of applications on building sites.
• Expansion-free anchoring allows low spacings and edge distances.
• Extensive range of accessories for a wide variety of applications.
• Ergonomic application guns for quick and easy installation.
• A variety of approvals cover many applications in nearly all building material and guarantee maximum safety.