Aquaproof & Anchoring Systems
Aquaproof & Anchoring Systems
Mundhwa, Pune, Maharashtra
SEND SMS
SEND EMAIL

Nitcote EN901

Prominent & Leading Authorized Wholesale Dealer from Pune, we offer nitcote en901 and fosroc renderoc fc.

Nitcote EN901

Nitcote EN901
  • Nitcote EN901
Ask For Price
Product Price :Get Latest Price

Product Details:

FinishingGlossColour
ColorGrey
Specific Gravity1.35
Compressive Strength70 N/mm2
Hardness70 Shore D
Abrasion Ressitance0.10mg/cycle
Service Temperature20-60deg C
Pot Life45 min at 23deg C
Tack Free Time4 hours at 23deg C
Over Coating Time4-16 hours at 23deg C
Full Cure7 days at 23deg C
Tensile Strength20 N/mm2
Flexural Strength20 N/mm2

Uses
Nitocote EN901 is an epoxy novolac coating designed to provide protection to concrete and steel structures in aggressive chemical conditions. The material is particularly suitable in wastewater treatment, desalination, food processing, electric power, chemical manufacturing, fertiliser and insecticide plants, petroleum refineries and pulp and paper mills.
Nitocote EN901 may be used with or without Nitoflor FC Anti-slip grains as a heavy-duty floor coating in applications such as chemical processing and drum storage areas, loading docks and ramps. It may also be used in conjunction with glass fibre cloth to increase the thickness of the system or to reinforce structures subjected to aggressive chemicals.

Advantage:
  • 100% solids, solvent free
  • Exhibits excellent chemical resistance in pH levels ranging from 1-14 at 25°C
  • Excellent adhesion to properly prepared concrete, mild steel, and other substrates
  • Excellent abrasion resistance


Description

Nitocote EN901 is a solvent free, highly crosslinked, high build epoxy novolac based coating. Nitocote EN901 is a two-part grey material applied by brush or roller. It is formulated to be applied in two coats to achieve a minimum total-dry-film thickness of 400 microns. Higher thickness can be specified.


Specification

Chemical and abrasion resistant lining

The chemical and abrasion resistant coating shall be Nitocote EN901, a high build, two-pack epoxy-novolac system specially designed to provide a tough and impermeable high chemical resistant film.

Request
Callback
Yes! I am Interested
View PDF

Fosroc Renderoc FC

Fosroc Renderoc FC
  • Fosroc Renderoc FC
Ask For Price
Product Price :Get Latest Price

Product Details:

Packaging TypeBag
Shelf Life6 Months
BrandFosroc
Form Of ChemicalPowder
Coefficient of Thermal Expansion7 x 10-6
Fresh Wet DensityApproximately 2000 kg/m3
Setting Time30 minutes - 1 hour
Working LifeApproximately 20 minutes

Polymer modified fairing mortar, to cover surface imperfections, (0mm to 3mm thickness)

Uses:
  • Renderoc FC cementitious fairing coat is designed for application in thin layers to produce a fair-faced appearance to concrete surfaces or masonry surfaces in readiness to receive a protective/ decorative coating.
  • Surface imperfections up to 3mm in depth can be filled with the scrape coat application. Voids of greater depth should be separately filled as a prior operation, again limiting the Renderoc FC material thickness to 3mm.
  • Renderoc FC can be used independently to infill surface imperfections and voids or to render large sections of concrete or masonry at up to 3mm thickness. It can also be used in association with other Renderoc mortars. Under normal conditions, the product does not require an independent primer or curing membrane.

Advantages:
  • Excellent bond to the concrete substrate
  • Easy to use - no independent primer or curing membrane necessary
  • Pre-blended to overcome site-batched variations - only the site addition of clean water is required
  • Contains no chloride admixtures

Description:
  • Renderoc FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand. The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings.

Technical Support:
  • Parchem offers a comprehensive range of high performance, high quality construction products. In addition, Parchem offers technical support to specifiers, end-users and contractors, as well as on-site technical assistance.

Design Criteria:
  • Renderoc FC cementitious fairing coat is designed for vertical and overhead use to infill blow holes, honeycombing and voids up to 3mm deep in the surface of concrete.

Specification Clause:
Fairing Coat:
  • The fairing coat shall be Renderoc FC, a single-component polymer modified cement-based blend of powders to which only the site addition of clean water shall be permitted. The material shall be capable of use without independent priming and curing systems.

Applications Instructions
Preparation:
  • Clean the surface and remove any dust, unsound material, plaster, oil, paint, grease, corrosion deposits or algae. Roughen the surface to remove any laitance and expose the fine aggregate by light scabbling or grit-blasting.
  • Oil and grease deposits should be removed by steam cleaning, detergent scrubbing or the use of a proprietary degreaser. The effectiveness of decontamination should then be assessed by a pull-off test.
  • Renderoc repair mortars require no additional preparation prior to the application of Renderoc FC.
  • No independent priming system is required.
  • The cleaned areas should be blown clean with oil-free compressed air before continuing.
  • All prepared areas should be thoroughly soaked with clean water immediately prior to the application of Renderoc FC. Any residual surface water should be removed prior to commencement. Care should be taken and the work scheduled to ensure the water does not run onto areas of recently applied Renderoc FC less than 12 hours old. Under severe drying conditions repeated soaking may be necessary to ensure the substrate is still saturated at the time of application.
Request
Callback
Yes! I am Interested
View PDF
X

Explore more products



Reach Us
Santosh Hingane (Proprietor)
Shop No. H-5, Ganga Terrace, Near Laxmi Mata Temple Pingale Wasti
Mundhwa, Pune- 411036, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS